这款PLC网关，电脑端采集到PLC输入输出信号后，是否有接口将信号传输出来，然后接入一个我们自己开发的3D可视化应用程序上？例如，你们的网关采集到PLC上输入X1信号是接通状态，通过局域网传输到了电脑上，这个信号状态可以通过你们配套的软件看到，然后这个信号是否可以有接口再二次转发出去给到别的应用程序？ 是否能实现如附件图所示的应用场景？

Salve, Allego documenti mancanti nella precedente richiesta. Attach document lose into previous request

Salve, il numero di telefono non è corretto, usare email Avrei bisogno di capire il funzionamento del sistema IOTBridge; Ho allegato un documento di testo perchè non era sufficiente lo spazio a disposizione qui. Hi, I need to understand how the IOTBridge system works; I have attached a text document because there was not enough space available here.

我看了下web页面发送的参数，有个/cmd的接口，这个接口能否被我们自己写的网页界面所调用，发送相关参数去更改端口设置

I placed an order on 22/3/23, received the product today (31/3/23). I tried connecting the supplied adapter. The machine does not display any status lights. I measured 1.5v (12v spec) so I replaced my adapter. So i open my pc's wifi to search wifi but can't find device name. So I switched to wired lan but still no ip assigned from the device. How can I fix this problem?

I placed an order on 22/3/23, received the product today (31/3/23). I tried connecting the supplied adapter. The machine does not display any status lights. I measured 1.5v (12v spec) so I replaced my adapter. So i open my pc's wifi to search wifi but can't find device name. So I switched to wired lan but still no ip assigned from the device. How can I fix this problem?