客户区域:开放工单
关键词搜索
搜索结果: 290
 
HF-A21 boot fault, need help
After downloading the firmware to the hf-a21-0 module via the web interface, the module stopped working. Now it reboots every 4-5 seconds. Is there a way to reset it in this state to the factory firmware, or load a new firmware into it? Do you have detailed information on working with the built-in bootloader? 通过Web界面将固件下载到hf-a21-0模块后,该模块停止工作。 现在,它每4-5秒重新启动一次。 有没有办法在这种状态下将其重置为出厂固件,或将新固件加载到其中? 您是否有使
提交时间: 2020年10月16日回复时间: 2020年11月11日
EW11连接服务器后,如果断开如何设置提示输出至USART口
EW11设置连接到服务器后,如果服务器断开,EW11是否可以有提示输出信息至USART给与之连接的设备?不否有要关的配置位置
提交时间: 2020年10月16日回复时间: 2020年11月11日
EE11怎么设置IP地址
EE11怎么设置IP地址,怎么把TCP的信息发送给它转换
提交时间: 2020年10月15日回复时间: 2020年11月11日
IOTService
IOTService全网搜索能搜到设备但是无法添加到列表
提交时间: 2020年10月14日回复时间: 2020年11月11日
请问HF2111A设备 在移动 联通 停了2G网络之后是否可以使用?
请问HF2111A设备 在移动 联通 停了2G网络之后是否可以使用?
提交时间: 2020年10月14日回复时间: 2020年10月14日
EW11设置为STA,如何配置连接网中连接服务器主机
将EW11配置为STA,连接到无线路由器中,然后想通过EW11与服务实现数据传输,如何配置EW11连接网络中的服务器主机(服务器主机有固定IP和端口)
提交时间: 2020年10月13日回复时间: 2020年10月14日
首页 171819
Copyright © 2018 上海汉枫电子科技有限公司       沪ICP备11048847号-1